Pipe Wipers are manufactured using specially designed rubber compound, which offers tremendous resistance to cutting, tearing, abrasion, water and oil-based muds. These tubing wipers are specially designed for the application on drill pipes, which should be placed above or around the drill pipe just below the rotary table, where a solid master bushing is used. When the drill pipe is removed from the well, the wiper will “clean” the mud from the pipe and return it to the casing.
RRP has designed Plastic core cementing plugs to compliment its line of plugs to decrease drill out times. The core of the plugs are manufactured using large plastic core coated with thin rubber coverings, which eliminates aluminium (metal) and large mass of rubber found in conventional aluminium cementing plugs. Our plastic core has high tensile strength and possesses a greater comprehensive strength (30 ksi) over the aluminium alloys (24 ksi). It can withstand a bottom hold temperature of up to 250°C for an extended period of time.
RRP desanders are easier to operate and maintain with the flexibility of mounting one, two, or three desander cones over a cone underflow pan. RRP desanders are having 12” hydrocyclones, in capacity ranging from 500 GPM to 1500 GPM at 75 feet of head. RRP Desilters are designed to efficiently remove finer drilled solids, sand & silt particle sized solids (10-60 microns) and built on heavy duty oil field type skid. RRP desilters are available in 8-, 12-, 16- and 20 cone models (balanced cone design), in capacity ranging from 480 GPM to 1200 GPM at 75 feet of head.